2009 Yamaha RS Viking Professional SOLD

Product Description

The World's Favorite Multi-Purpose Sled.


120 HP Class.


Performance:


3-cylinder Genesis® 120 4-stroke engine - The smooth-running 120hp-class Genesis 120 triple has proven itself one of the most reliable engines in all of the sport. Its broad power curve and excellent fuel economy have earned this carbureted classic a strong following among high-mileage enthusiasts. As you can see from the dyno chart in the technology section, the Genesis 120 keeps pulling hard once it gets into the peak performance zone. Competitive 2-stroke engines fall off as soon as they achieve their peak horsepower.


Direct-to-crankshaft clutching - Instead of using a gear reduction, the Genesis 120 engine has the primary clutch directly attached to the crankshaft. It allows the engine to be mounted deeper in the chassis to deliver a lower center of gravity, further improving the sleds cornering stability. The YVXC primary spins at 8500 RPM to transfer power from the engine to the secondary and on to the track.


20x156x1.25-inch Camoplast® Rip Saw™ track - The Camoplast® Rip Saw™ track is widely accepted at the best OEM track available. The 1.25-inch lugs are designed to deliver maximum acceleration, deceleration and cornering bite. It is specifically engineered to be lightweight yet durable, thanks to its unique internal construction. The Rip Saw™ track development was a joint venture between Camoplast® and Yamaha. The RS Viking Professionals extra-large version of the Rip Saw™ gives it excellent flotation in fresh snow.


Dual-range Hi/Lo and Reversetransmission - The RS Viking Professional has a dual-range transmission, allowing owners to operate the sled in low range for towing heavy loads below 50 MPH or in high range when not towing. The transmission is engaged via a lever on the right-hand side of the cab. The transmission lever also activates the reverse gear.


Lightweight forged pistons - The forged pistons used in the Genesis 120 engine are engineered for light weight and still allow high compression rates of 11.3:1 on 87 Octane gas.


Handling:


Ultra-rigid Deltabox™ chassis - The Deltabox chassis is designed specifically to house the Genesis® engine family. It supports the engine and utilizes it in forming one of the most rigid chassis on the market. The more rigid the chassis, the more consistent the sled will handle.


Second generation front suspension geometry - The geometry of the second generation front suspension features short spindles and long, curved A-arms. The suspension was engineered to deliver excellent cornering stability and consistent turning effort throughout its travel stroke. It delivers 9 inches of vertical travel and sets the skis at 42.7 inches. Steering is consistent, because the spindle caster is maintained at a constant 23 degrees. The curved A-arms help avoid under-snow obstacles.


CF die cast construction - Yamahas Controlled Flow casting technique is used for many of the structural pieces on the chassis. The CF process draws the molten metal into the mold under a vacuum, reducing the formation of air bubbles in the material. As a result, pieces can be made much thinner and still deliver the strength characteristics of a conventionally-cast, thicker piece.


Traditional handlebars with center grab strap - The RS Viking Professional has a traditional-style handlebar with a center grab strap. This setup helps users to maneuver through fresh snow or tight spaces.


Wide plastic skis - The RS Viking Professionals wide plastic skis give it excellent flotation over fresh snow, while also giving it good trail cornering ability.


Comfort:


ProAction Plus™ rear suspension with articulated tail section - The ProAction Plus rear suspension on the RS Viking Professional has an articulated rail extension to give it great over-snow performance while in reverse. It also has the unique quick-adjust system to change both shock and spring rate settings on the upper arm.


Removable passenger seat - The seat on the RS Viking Professional is very roomy to accommodate two riders in full gear. The passenger section can be easily removed if desired. When hauling loads is the order of the day, the passenger section can be removed without tools for added cargo space. The easy adjustable backrest can be repositioned to give the driver a rest on solo runs.


Cavernous under-seat storage - The seat on the RS Viking Professional flips up to open a large storage area beneath it. The space has a tool kit integrated into it. Consumers can carry extra spare parts, a full collection of tools, and even lunch under the seat.


Tow hitch - The RS Viking Professional has a tow hitch mount on the rear of the sled. Consumers can tow a trailer sled for more cargo capacity.


Extra tall windshield - The RS Viking Professional is all about getting the job done, no matter what, so the windshield is very large to protect both driver and passenger from the elements.


Digitally controlled hand and thumb warmers - The RS Viking Professionals hand and thumb warmers have been consistently rated among the best in the industry. They are individually controlled, with the settings shown on the digital gauge so that riders can see them. Owners can choose from 10 settings on the grips and 10 settings on the thumb warmers, as opposed to the hi/lo settings of most other sleds on the market. The passenger hand grip warmers have a separate on/off switch.
COLORCandy Red
Dark Blue
ENGINEType / Displacement / cc: 4 Stroke / 973cc
Cylinders: Three
Horsepower Class: 120 HP
Cooling: Liquid
Bore & Stroke / mm: 79.0mm x 66.2mm
Intake Design: Two valve
Carburetion: 40mm Keihin® carburetors, liquid-heated
Ignition: Digital T.C.I. with throttle position sensor
Exhaust: Rear exhaust
Clutch / Transmission: YVXC, variable ratio, H/L/R transmission
Disc. Brake Type: 2-piston hydraulic w/ lightweight ventilated disc
CHASSISFront Suspension: Independent, double wishbone
Front Shocks: KYB® gas cell
Front Travel / in.: 6.7 in
Ski Type: All plastic SUV wide ski
Carbide Ski Runners: Standard
Stabilizer Bar: N/A
Rear Suspension: ProAction® Plus
Rear Shocks: KYB High Presure Gas
Rear Travel / in.: 11.5 in
DIMENSIONSOverall Length / in.: 128.7 in
Overall Width / in.: 47.2 in
Overall Height / in.: 54.3 in
Track/Width x Length x Height / in.: 20 in x156 in x 1.25 in Camoplast RipSaw
Ski Stance (ctr. to ctr.) in.: 40.2 in
Estimated Dry Weight: 782 lb
Fuel Capacity / Gal.: 11
Fuel Type: Regular Unleaded
Oil Capacity / Qts.: 3, dry sump
Engine Oil Type: Yamalube 4, 0w-30, Cold Weather Formula
ADDITIONAL FEATURESElectric Start: Standard
Reverse: Standard
Hand & Thumb Warmers: To-the-end, 10-position adjustable
Windshield Height: Tall
Mirrors: Standard
Seating Capacity: Two
Backrest: Standard, Removable
Rear Carrier Rack: Standard
Tow Hitch Mount: Standard
Headlight Watts, Type: 60/55W Halogen x 2
High Beam Indicator: Standard
Oil & Temp Light: Standard
Fuel Gauge Type: Electric (LCD), Low Fuel Warning Light
Speedometer: Standard (LCD Digital)
Odometer: Standard (LCD Digital)
Tripmeter: Standard (LCD Digital)
Tachometer: Standard (LCD)
DC Outlet: Standard
Warranty: 1 Year (Limited Factory Warranty)
PERFORMANCE3-cylinder Genesis® 120 4-stroke engine
Direct-to-crankshaft clutching
20x156x1.25-inch Camoplast® Rip Saw™ track
Dual-range Hi/Lo and Reversetransmission
Lightweight forged pistons
HANDLINGUltra-rigid Deltabox™ chassis
Second generation front suspension geometry
CF die cast construction
Traditional handlebars with center grab strap
Wide plastic skis
COMFORTProAction Plus™ rear suspension with articulated tail section
Removable passenger seat
Cavernous under-seat storage
Tow hitch
Extra tall windshield
Digitally controlled hand and thumb warmers

Image Gallery

Company Profile

Honda East Toledo

• Contact Name Gabe Miller
• Tel 419-891-1230
• Fax 419-891-1218
• Address 1230 Conant Street
• City Maumee
• State Ohio
• Country United States
• ZIP/Postal Code 43537

Company Description

As a family owned and operated business, our philosophy is to treat each customer like a family member, every visit. Our award-winning sales staff will strive to meet and exceed your expectations, whether you are purchasing a new vehicle, calling with a question, picking up a part, or just looking in our shop.

Since the inception of Honda East in 1986, we've developed an unbeatable local selection of 12 powersports vehicle manufacturers. If you take a look at our history, you can see that our dealership has gained some serious momentum over the years. We don't forget our history either. Our Honda franchise started it all, and Honda East has been the largest volume Honda dealership in the state of Ohio for 3 years running.

To complement our great vehicle selection, Honda East boasts a service department full of certified technicians. These techs have more than 160 years of collective experience among them, and each one has their own forte in the shop.

In addition to these 12 vehicle manufacturers, and knowledgeable staff in our parts shop, we supply riding gear and casual apparel from brands like Fox Racing, Shift, Joe Rocket, Arai, Scorpion, Teknic, Shoei, and many, many more. This dealership also recently became the number one distributor of Fox Racing gear and apparel in northern Ohio! Our selection is constantly growing. In addition to our catalog and in-store selection, we place custom orders daily - so if you aren't finding what you are looking for, just ask! Drop by our retail shop and browse, or visit one of our online marketplaces to get a taste of our stock and quality service.

What does all of this mean for you? It means that we want to help you get the right vehicle, part, or gear by making an informed decision. We want to make each experience at Honda East easy on our customers, and our skilled staff will be here to help every step of the way.

See All Dealer's Listings