2018 Ski-Doo Freeride Electric PowderMax Light 2.5 FlexEdge Rota SOLD

Year : 2018
Mileage : 3,295 Miles
Location : Big Bend, WI, US
Price : $ 9,999

Product Description

HAND GUARDS, 154 , 2.5 , ELECTRIC START , REVERSE, HAND GAURDS, BAR RISER, FOX DECAL PACKAGE, QUICK DISCONNECT SWAY BAR. KYB SHOCKS. ICE SCRATCHERS.

2018 Ski-Doo Freeride Electric PowderMax Light 2.5 FlexEdge Rotax 850 E-TEC REV Gen4 H ALT 154READY FOR WHATEVER YOU CAN COME UP WITH

For some riders, carving deep powder is just one part of the experience. The other is pushing themselves and their sleds to the limits. Thats what the Freeride 154/165 is all about. Available with E-TEC SHOT Starter.

ROTAX 850 E-TEC ENGINE

MORE POWER YOU CAN FEEL

The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, its 30% quicker responding than the 800R E-TEC giving you the instant control you demand.

*Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines.

E-TEC SHOT ENGINE STARTER

EASIEST STARTING

Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology.

REV Gen4 PLATFORM

NEXT GENERATION OF A LEGEND

Key to the Freerides agility is the extreme mass centralization of the 4th generation REV platform. The 850 E-TEC engine is compact and centered between the skis, making the vehicle easy to roll. The trademark pyramidal frame, new die-cast aluminum front suspension module and new heat exchanger design ensure its strong, yet lightweight.

PDRIVE CLUTCH

QUICK, EFFICIENT, EASY

A major factor in the quickness of REV Gen4 sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% new clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII.

KYB PRO SHOCKS

PRO-LEVEL SHOCKS

These shocks are standard on the MXZx 600RS race sled - so you know they're extremely capable and durable for control in the toughest conditions. Remote reservoir design for performance and they are a rebuildable/revalvable. Easy Adjust compression damping knob does not require tools; rebound adjustments are standard as well.

MOUNTAIN-SPECIFIC DESIGN

DESIGNED FOR THE MOUNTAINS

We advanced mountain sled design for easier and more predictable handling in all conditions. The narrow body panels, bottom pan, tunnel and running boards are designed for optimal interface with snow in mountain maneuvers. An open tunnel end eliminates drag.

PROFILE RUNNING BOARDS

SURE FOOTING

Snow passes easily through the extruded grid-style board preventing washout and trenching, plus clears footrests for grip. Flatter foot position for comfort and control. .75 in. / 20mm higher than REV-XM.

TMOTION REAR SUSPENSION

CARVES WITH YOU

The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable.